Automatic pad-shuttle

Two color printing with pad-shuttle
using only one jig

To avoid off centre load on the pad guiding system, if using two large pads, both inks
are picked up at the same time and together from the clishee plate.
After that, the pad bridge is moved to the left side, that one of the pads is centered in
the middle to the machine. After the first ink has been printed, the pad
bridge is shuttled to the other side, and the second pad now is centered above the product

shutanim.gif (78575 Byte)

 A both pads picking up
the inks from the plate
B pad bridge shuttles asymetric to the left side
and prints one color symetric onto the part.
C pad bridge shuttles to the right and prints
the second color.